Square Reinforcing Mesh, Reinforcing Mesh Panel

PRODUCT DESCRIPTION

Heyou 

Reinforcing Mesh

Square Reinforcing mesh or Reinforcing Mesh Panel was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. Heyou has a 14-year history of creating top-quality steel mesh solutions. We ensure every aspect of the manufacturing process meets the highest standards. Whether you need custom specifications, precise physical property measurements, or a professional construction plan, we will achieve your needs and feel free to contact us anytime.

Heyou 

Square 

Reinforcing Mesh Advantages

Clearly ribbed on the surfaceFirmly weld spotAccurately wire diameterMesh space messuredUniform mesh spacesFlat and smooth mesh surface

The Steel Bar After Drawing Shape as Below Figure

1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d.

2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost.

The skatch of reinforcing mesh as below:

NL= Number of longitudinal bars

PL= pitch of longitudinal bars

dL= diameter of longitudinal bars

NC=Number of transverse bars

L= length of longitudinal ba

rB=Length of transverse bar

u1=Overhang of longitudinal bars

u2=Overhang of longitudinal bars

Our Products Packing and Shipment

Steel pallet for reinforcing mesh size 2.4m *6mLoading container for reinforcing mesh sheet: 2.4m *6m

Reinforcement Mesh P

anel 

Specification Diagram and Bar Arrangement

Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars.

Single barsTwin barsCombination of single bars and twin bars

The Technical Data of Reinforcing Mesh Panel

(The technical data of reinforcing mesh panel is contained composition and characteristic mechanical porperties of reinforcing steels.)

Composition of Reinforcing Steels

Type of analysisChemical composition, % maxAll gradesCarbon equivalent value(Ceq)for standard gradesCPS250N500L500N300E500ECast analysis0.220.0500.0500.430.390.440.430.49Products analysis0.240.0550.0550.450.410.460.450.51

Characteristic Mechanical Properties of Reinforcing Steels

Property250N(Note1)500L(Note1)500N300E(Seismic)500E(Seismic)Type of specified valueYield Stress(Mpa) RekL RekU≥250---------≥500≤750≥500≤650≥300≤380≥500≤600CvL: p=0.95CvU: p=0.05Ratio Rm/Re≥1.08---------≥1.03-----------≥1.08--------≥1.15≤1.50≥1.15≤1.40CvL: p=0.90CvU: p=0.10Unitform Elogation Agt(%)≥5.0≥1.5≥5.0≥15.0≥10.0CvL: p=0.90

More Information About Square Reinforcing Mesh

Notice:

1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679. 1, exceptthe tolerance of the diameter and roundness dosen't apply it.

2. For 500L steel bars, only requriement for wire diameter is less than 5.0mm is RekL≥500

Material certificate of reinforcing mesh as below:

Common Size of Squre Reinforcing Mesh Panel for Austialian Market

Mesh Type and reference numberLongitudinal barsCross-barsMass for 6 x2.4 m sheetsCross-sectional area/m widthNo. x dia., mmPitch@mmNo. x dia., mmPitch@mmUnit area kg/sqmSheet, kgLong'l bars sqmm/mCross bars sqmm/mSqure, with edge side-lapping barsSL10210 x 9.5 + 4 x 6.7520010030 x 9.52005.680354354SL9210 X 8.6 + 4 X 6.020010030 x 8.62004.666290290SL8210 x 7.6 + 4 x 6.020010030 x 7.62003.652227227SL7210 x 6.75 + 4 x 5.020010030 x 6.752002.841179179SL6210 x 6.0 + 4 x 5.020010030 x 6.02002.233141141Squre, without edge side - lapping barsSL8125 X 7.610060 x 7.61007.1105454454

How can we conctrol our products quality for exporting Autralia?

Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.

Secondly, the panel size tolerances meassure way as:

a. Panel Size dimensions≤6m in length, there is 40mm tolerances.

b. Panel size dimensions＞6m in length, the tolerance is ±0.7%

c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS  4761-2001 and as per contract.

d. Weigh the each bundle weight to calculate each panel weight.