Step beyond the ordinary and into the extraordinary with Luxury Vinyl Plank (LVP) flooring from Amber.
RAITTO are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
With unmatched durability, stunning designs, and easy installation, LVPs will give your floors a facelift without breaking the bank!
Luxury Vinyl Planks offer the durability and flexibility of vinyl with the appearance and texture of natural wood.
LVP flooring has become increasingly popular because it stands out from traditional flooring options in several ways:
Hybrid LVP in Grand Heritage Limewash
Tarkett's LVPs available here at Amber are constructed from five distinct layers.
Tarkett cares about the environment, producing each plank without harmful compounds. This process results in indoor air quality that's ten times better than Europe's highest standards!
Hybrid LVP in Savannah Brown
Hybrid LVP in Oakland Classic
After weighing up your flooring options and choosing LVPs, you must now decide on their installation method!
If you decide to go down the DIY route, follow these installation steps.
Store the LVPs in the room where they&#;ll be installed for at least 48 hours before installation to acclimate to the room's temperature and humidity.
Remove any debris, nails, or staples from the subfloor, then clean it and allow it to dry. Then, use a levelling compound to fill in low spots and sand down high spots.
Calculate the room's square footage to determine the amount of flooring needed, adding 10% for waste and cuts.
Decide on the direction of the planks. It&#;s typically recommended to run the planks parallel to the longest wall or main light source.
If the LVPs you choose don&#;t have a pre-attached underlay, install a suitable underlay according to the manufacturer's instructions. The LVP products we use here at Amber come with a pre-attached foam backing to help cover sub-floor imperfections so you can lay them directly onto your existing floor in most cases.
Measure and cut the planks for the first row, ensuring the cut edge is against the wall.
Start from a corner, laying the first plank with the cut edge against the wall. Continue connecting planks end-to-end, using a tapping block and mallet as needed.
As you start new rows, stagger the seams by at least 15 cm from the seams in the previous row for a more natural look and added stability.
Measure and cut planks using a jigsaw or utility knife to fit around cabinets, doorways, and other obstacles.
Measure and cut the planks to fit the last row, leaving a 6 mm gap around the room's perimeter to allow for plank expansion and contraction with changes in temperature and humidity.
Install transition strips at doorways and skirting boards around the room&#;s perimeter to cover the expansion gap and create a neat, finished look.
Tarkett's LVP flooring uses printed Tru-Grain&#; Technology to recreate the look of natural timber in seven unique styles and 12 gorgeous colours.
This variety means you can incorporate LVP flooring into different decor styles.
Classic: Rich, deep oak or walnut tones and distinct grain patterns complement the timeless appeal of classic decor.
Modern: Minimal grain visibility in neutral colours like light grey or charcoal is perfect for a contemporary, minimalist look.
Coastal: Planks that mimic light, weathered wood, like limewash, evoke a beachy, relaxed feel.
Farmhouse: LVPs that replicate reclaimed wood in warm beiges, tans, and browns enhance the cosy, rustic charm of the farmhouse style.
Industrial: Dark brown, charcoal, or planks that resemble concrete fit the raw, edgy industrial aesthetic.
Scandinavian: Light wood tones with minimalistic grain patterns and a matte finish match this clean, bright style.
Follow these cleaning and maintenance tips to keep your LVP flooring beautiful and functional for years to come.
Daily:
Sweep with a soft broom or vacuum with a hard floor attachment.
Wipe up spills immediately.
Weekly:
Mop with a mild cleaner designed for vinyl flooring. Steer clear of abrasive cleaners and bleach, as these can damage the floor's surface. Even though LVPs are water-resistant, excessive water can seep through the edges and cause damage, so avoid using lots of water when mopping.
Prevent scratches by keeping pets&#; nails trimmed and avoiding dragging furniture across the floor. It&#;s a good idea to use protective pads under furniture. Use doormats at entrances and rugs in high-traffic areas to minimise dirt and debris. Protect from fading caused by prolonged exposure to direct sunlight by investing in curtains, blinds, shades, shutters, or UV-protective window films.
The main downside of LVP flooring is that it doesn't improve property value as much as natural wood or stone flooring.
Additionally, while LVP flooring is durable and long-lasting, once it wears out, you cannot refinish it; it must be completely replaced.
LVP flooring is often considered better than laminate due to its superior water resistance, more realistic timber look, and softer feel underfoot.
Yes, it is! So, it's
Contact us to discuss your requirements of Custom Vinyl Flooring Skirting Boards Manufacturer. Our experienced sales team can help you identify the options that best suit your needs.
suitable for installation in areas of the home prone to moisture,such as bathrooms, kitchens, and laundries.
Do your floors need a new lease on life?
With LVPs, you're not just choosing a new floor; you're opening the door to endless style, comfort, and resilience.
If you're still wondering, "What is LVP flooring?"- Amber has the answer. So please contact our team today by filling out this online form.
We also encourage you to browse our stunning, high-quality LVP flooring range online. Then, visit a showroom near you to see the range in person. You can also book a free design consultation for professional advice from one of our in-store flooring experts.
Skirting board mouldings are a staple in the British building industry, with a rich history dating back centuries. Originally used to conceal the joint between walls and floors, skirting boards also provide a visually pleasing finish. Today, skirting boards remain a popular choice, particularly in traditional properties, and can be found in a variety of shapes and sizes. Skirting or base boards are used in most buildings in one form or another.
Finding the ideal skirting board moulding in the UK can be a challenge. The availability of different types of wood, various sizes and shapes, and limited customisation options can make it difficult to find the perfect product for your project. However, there are now a number of online suppliers offering a wide range of skirting board mouldings, including custom and replica mouldings, as well as made-to-match profiles.
We also offer a unique service that lets you customise skirting board profiles or have skirting made to measure and then receive multiple quotes to be able to buy to your exact needs. Connecting to you the best wooden skirting manufacturers across the country. Click here to learn more.
For those looking for a more unique or specific skirting board moulding, custom and replica options are available. Custom mouldings are created based on a specific design or pattern, while replica mouldings are exact replicas of historical or antique mouldings. These options allow for greater flexibility and personalisation in your skirting board choices.
Matching skirting boards and architraves is often recommended for a unified and cohesive look. However, if the skirting boards and architraves are of different depths or styles, it may be better to choose a different style of architrave that complements the skirting. Ultimately, the choice will depend on the specific design and aesthetic of your project.
We also suggest having a slightly thicker architrave that your skirting board so that, when the skirting abuts the door trim or architrave, there is a deliberate difference on the surface plane of the two boards. Creating a &#;step&#; to avoid showing any visible discrepancies or cracks if things don&#;t quite line up. This only needs to be a few mm and it makes all the difference. A flush (same thickness) finish can look unsightly where the vertical of architrave meets the horizontal of the skirting.
Types of Skirting Board
Skirting board plays an important role in the overall look of any room. When choosing your skirting, it&#;s important to consider the different types and styles available. Options include hardwood architraves and skirtings, matching skirting and architrave, wooden skirting, skirting mouldings, wooden skirting board, skirting board profiles, and more. Each type of skirting board has its own unique characteristics and benefits, so be sure to consider your specific needs and preferences when making your selection.
Wooden skirting boards come in a variety of styles and types, each with its own unique design and historical significance. Some popular period moulding styles include period skirting boards such as; Victorian, Georgian, and Edwardian. Victorian skirting boards are typically ornate, with intricate patterns and carvings, while Georgian skirting boards are simpler in design, with a focus on symmetry and proportion. Edwardian skirting boards are a mix of both styles, with clean lines and subtle details.
In terms of types, there are flat skirting boards, which are simple and straightforward, and chamfered skirting boards, which have angled edges for a more decorative effect. There are also bullnose skirting boards, which have a rounded edge, and ogee skirting boards, which have a curved profile with a double s-shaped curve.
Torus skirting boards are a popular choice, featuring a semi-circular shape that adds depth and character to a room. Chamfered and splayed skirting boards are another option, with angled edges that create a subtle yet modern look.
Square skirting boards, on the other hand, offer a simple, no-frills design that can complement any interior. Grooved skirting boards are a more unique option, with horizontal grooves that adds texture and interest. Finally, contemporary styles like minimalist and streamlined skirting boards offer a sleek, modern look that is perfect for contemporary homes.
No matter your preference, there is a wooden skirting board to suit any style or period.
Skirting Board: Choose Wood Species to Match Your Project
The type of wood used for skirting boards can greatly impact the final look of your project. When restoring historic buildings or creating custom mouldings, it is essential to choose the right wood species for your skirting boards. Hardwood skirting is a popular option for skirting boards due to its durability and strength. It&#;s often used for intricate designs and is a great choice for restoring historic buildings. Other options include pine or other softwoods all are suitable for both new builds and restoration projects. Often, if a building is listed, it is not a case of try to match the wood species, it is a legal requirement to do so. We have worked on projects where the source and species must be identical to that of the existing wood within the listed building or skirting being restored.
Skirting-board Non-wood Derivatives: Benefits and Drawbacks
When it comes to restoring a historic building, or adding a beautiful finishing touch to a property, skirting-board is an essential part of the process. Non-wood skirtings are an option here are some pros and cons of non-wood derivatives such as PVC, vinyl, stone, metal or ceramic. The can offer a number of benefits over traditional wood options. One of the main benefits of using non-wood derivatives is their durability and resistance to moisture. The above mentioned are both waterproof and rot-proof, making them perfect for use in damp or humid environments.
Additionally, they can be less expensive than their wooden counterparts, making them a cost-effective option for those on a budget. However, there are also some drawbacks to consider when using non-wood derivatives for skirting-board mouldings. One of the main downsides is that they are not as environmentally friendly as wood, and may not be suitable for use in certain conservation areas or historic buildings. They may not have the same level of quality and craftsmanship as wooden skirting-board mouldings, and may not have the same level of detail or character.
We have not yet mentioned MDF &#; I have been in the construction industry since the 90s and have tried to avoid MDF like the plague. It is both horrible to machine (fine dust that this hazardous to health) and work with, hard to fix, hard to protect and transport and just not nice, just my view. The only upside is the cost and if you are painting the skirting it can work.
Overall, when it comes to skirting-board mouldings, it&#;s important to weigh the pros and cons of different materials, and choose the one that best fits your project and desired look. Whether you choose traditional wooden skirting-board mouldings or modern non-wood derivatives, it&#;s important to work with a reputable supplier who can provide high-quality products and expert advice.
How to Install Skirting-Board Mouldings
Installing skirting-board mouldings can be a challenging task, but with the right tools and techniques, it can be done with ease.
Here are a few tips to help you get started: Measure and mark out the area where the skirting-board will be installed. This will ensure that you have the correct amount of skirting-board moulding and that it will fit correctly. Always allow for 10-15% more than you have measured due to cuts, corners, mitres and joints.
Cut the skirting-board moulding to the correct length. Use a saw or a mitre saw to make precise cuts, and ensure that all cuts are square. Mitre corners and joints. Applying adhesive to the back of the skirting-board moulding as well has nails or screw fixings can help. Consider the application, species and desired finish when it comes to method of fixing. If painting you can pin (nail), screw and fill.
If leaving the wood finish a pellet to cover the screw head is best. To do this you will need to countersink the screw below the surface and use a pellet cutter to remove a section/pellet (ideally from the rear or the same board, to match the grain, or an off cut). Then glue the pellet over the screw, after you have used a cutter to house the pellet tightly, ensuring the grain is lined up with the wood face.
Once properly fixed you can sand down any filler or pellets to create a smooth finish and paint, stain, oil or wax the skirting-board moulding to match your desired look.
Conclusion
Wood skirting-board mouldings are an important aspect of any building project, and can add a touch of elegance and character to any room. Whether you're restoring a historic building or creating a new look for your home, there are a variety of options available to choose from.
Try our unique system; we can help you to match, copy or replicate any skirting board and we connect you to the best manufacturers, millworkers and moulding suppliers to ensure your baseboard is made to match. Plus we have hundreds of standard skirting profiles that are completely customisable.Plus you can match your skiting board profile with ease.
---
For more Custom Vinyl Flooring Skirting Boards Factoryinformation, please contact us. We will provide professional answers.