Our customer service team are always happy to answer any questions but we&#;ve also listed some of our most Frequently Asked Questions here so you can search for your answer at your convenience. Still don&#;t have the answer you need? Please contact us to reach out to our customer service team.
Heyou contains other products and information you need, so please check it out.
Do you have a steel fixing team?Yes, we have skilled in-house fixers and our experienced team of 57 is one of the largest in the country. Find out more about our steel fixers here.
Where is your steel from?We use NatSteel product, sourced from Singapore, with a maximum 12m-long bar length.
Do you have a minimum order?Yes, our minimum charge is $500 +GST including P & G (preliminary & general).
Do you offer delivery?We certainly do. Our trucks have STD HIAB lifting facility to unload material onto ground level.
Do you have a maximum order?Our factory with its state-of-the-art machines has the capacity to cut and bend up to tonnes a month. Please contact us ask us about your specific order.
Do you work New Zealand-wide?Depending on the size of the job, yes, we do but we mainly focus on greater Auckland, Waikato, the Bay of Plenty and Otago.
What reinforcing steel is used in New Zealand?Micro Alloy Seismic Grade 300e & 500e.
What is the minimum lap length for reinforcement NZ?Lap lengths are based on the type of structure and calculations. NZ standards have a lap length given for each diameter, as per building code NZ:. This will be specified by the project&#;s engineers.
What is the difference between 665 and 668 mesh?665 mesh has a wire size of 5.3mm and 668 mesh has a wire size of 4mm. Both have wires at 150mm centres. Both are available in different sizes.
What is 665 mesh used for?Non-seismic/ductile work such as driveway, vehicle crossing etc. This is generally down to an engineer specifying, as per the code NZ.
Why use bar chairs?To get the defined concrete cover to the reinforcing steel or mesh, it&#;s common practice to use different sized bar chairs. It also prevents bars from possible corrosion.
How many bar chairs do I need?Generally, it is recommended a bar chair every 1m distance, however it also depends on bar type and weight to maintain required cover. Usually it should carry the weight of a man standing on them. Please contact us to ask us about your specific project.
What is the NZ equivalent to this Australian specification?Generally, as per code ASNZS :.
Australian CodeNew Zealand CodeEquivalentSLSLDSLDSLDSLD How many tie wires are required to tie the steel?It is recommended 6-8kgs per tonne are required to tie reinforcing steel.
Do you sell galvanized bars?Yes, we absolutely do sell galvanized products. It is made to order including bars and mesh. Contact us about your specific project enquiry.
What is the difference between black and gray rebar?Galvanized rebar is only forty times more resistant to corrosion than black rebar, but it is more difficult to damage the coating of galvanized rebar. In that respect, it has more value than epoxy-coated rebar. However, it is about 40% more expensive than epoxy-coated rebar.
What is the spacing for rebar NZ?The reinforcing steel should always have at least 50 mm cover and 75 mm when spaced off bare ground, unless a more thorough determination of cover is undertaken in accordance with NZS . There must be enough &#;chairs&#; or supports to ensure that the steel doesn&#;t sag into that cover space.
Enquire now to get a quote on concrete reinforcing or steel fixing for your next project.
Contact UsTake a TourPRODUCT DESCRIPTION
Hard drawn mesh is specified in AS/NZS : . Heyou wire mesh offers a range of mesh sheet sizes and certres to meet the needs of typical New Zealand applications.
Our scope covers standard sheet sizes of 4.65m x1.97m and larger economical sheets 6.15m x2.42m. The pitches are 150mm x150mm or 300mm x 300mm.
AS/NZS : specification for hard drawn mild steel wire for concrete reinforcement
The mechnical property required by standard AS/NZS :
Nominal diameter(mm)Minimum 0.2% proof stress(Mpa)Tensile strength(Mpa)MinimumMaximumUp to and including 3.Over 3.The pitch (a) of longitudinal bars and transvers bars is not less than 50mm. The pitch is measured as below shown. The tolerance of the pitch is not more than 0.075 times the specified value.
Specification of hard drawn mesh
ModelPitch / certresWire dia.(mm)Length (mm)Width (mm)Newt cover (sqm)Heyou reinforcing itemCross section sqmm / mMass per sqm kg / sqmNo. of Longitudinal wireNo. of Cross WireOverhangs of Longitudianal wireOverhangs of Cross wireWeight (kg)..L83.81.//...L147.12.//...L207.83.//...E147.12.//...E207.83.//...E263.94.//...E294.54.//. Centres of hard drawn meshEquivalents are based on the nominal sectional area of steel per meter width.
Additional meshes specification are available as a special order.Minimum order quantities will apply. Please mail to us Heyou wire mesh for further details.
What does SE62 mean?
In standard AS/NZS : , the designates letters to be used to identify reinforcing mesh products:
S=squre( shape of grid centers)
E= Seismic grade(Earthquake)
6=6mm wire diameter
2=200mm certers distance.
Are you interested in learning more about 668 Hard drawn mesh? Contact us today to secure an expert consultation!
More details of hard drawn mesh and seismic grade reinforcing mesh
ModelHeyou reinforcing itemUniform Elongation %0.2% proof stressRatio Rm/ReWire diameterMin(Mpa)Max(Mpa)668
665
663
665
663
662
661
668
665
668L
665L
663L
665E
663E
662E
661E
84/10
147/10
&#;1.5%485668
665
663
665
663
662
661
668
665
668L
665L
663L
665E
663E
662E
661E
84/10
147/10
&#;1.5%&#;1.03%&#;5.0mmModelHeyou reinforcing itemUniform Elongation %Yield StrengthTensile RatioWeld Shear StrengthMin(Mpa)Max(Mpa)MinMax665SE62 RES&#;10%.151.4&#;5.9665SE62&#;7.3665SE73&#;11.0665SE73DE&#;5.9664SE72&#;5.9662SE82&#;5.9661SE92&#;5.9The hard drawn mesh type and connection way as below:
ModelHeyou reinforcing itemThe hard drawn mesh typeLLLEEEE//10665SE62 RES665SE62665SE73665SE73DE664SE72662SE82661SE92The company is the world’s best What is hard drawn mesh supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
ModelHeyou reinforcing itemConnection way DrawingLLLEEEE//10665SE62 RES665SE62664SE72662SE82661SE92665SE73665SE73DE