I-joists are structural engineered wood products used for framing floors and roofs. The consistency allows for solid performance and smooth ceilings.
With competitive price and timely delivery, XINFUSHI sincerely hope to be your supplier and partner.
Like all joists, I-joists are typically used to transfer loads to beams, walls, and the foundation. Unlike traditional dimension lumber, which can twist, split, and bow, I-joists offer better consistency and strength while weighing less and being easier to handle. These attributes make I-joists popular with builders of single-family homes, as well as light commercial and multi-family structures.
I-joists have become a construction industry standard largely because they offer reliable strength, consistency, and engineered performance that can provide a better value than dimension lumber. But that&#;s just the start of their benefits.
More Strength: Thanks to their unique construction, some I-joists, including Boise Cascade® I-Joists, are 20 percent stronger than comparably sized dimension lumber.
Longer Lengths: I-joists can be used to create long spans with less blocking to install faster. Something that dimension lumber simply can&#;t match.
Easier Handling: Dimensional lumber can be heavy and difficult to handle, but I-joists are lightweight, helping to reduce labor hours and labor costs.
Adaptable on the Jobsite: Most I-joists come with pre-stamped knockouts for wires, and allow for larger holes to be cut out of the web for mechanicals and can have very little change in performance. This makes running HVAC, electrical, and plumbing much faster and simpler.
Faster Installation: I-joists can be quickly trimmed in the field and offer a wider nailing surface for speedy installation.
Always Consistent: I-joists are engineered and manufactured for reliability &#; you&#;ll receive the same carefully made, consistently performing, and professionally inspected product time after time.
Sustainably Made: A typical I-joist uses only about half the wood of dimension lumber. The raw materials used in the manufacture of BCI and AJS I-joists are sourced from sustainable and responsibly managed forests. Boise Cascade strives to maximize the use and minimize the waste of each log procured. Bark and material residuals are used for carbon-neutral biomass fuel to generate over 70% of the energy needed to manufacture our products, keeping our emissions and reliance on fossil fuels low.
I-joists are a go-to product for residential and multi-family construction projects because they&#;re available in common sizes for today&#;s construction projects. They can also reduce common mistakes and hassles to make: framing simpler, floors flatter, and homes perform to meet customer expectations.
The strength and stability of I-joists make them a popular choice for engineered floors and roof framing. I-joists come in longer spans than dimensional lumber but without the potential defects and imperfections that eat up time and labor at the job site. With less shrinking, twisting, and bowing, the result is simpler floor and roof layouts that perform over time. Their consistency and performance, along with proper design, helps reduce vibrations, which means less bounce, fewer squeaks, and solid, quiet floors.
For more information, please visit i joist beam.
I-joists consist of OSB web between two flanges, which are typically constructed of dimensional lumber or laminated veneer lumber (LVL) and joined by a durable structural adhesive. BCI® Joists use Versa-Lam® LVL for strength and durability while AJS joists have flanges made of machine stress-rated lumber.
A finished I-joist looks like the letter I, lending the product its name.
I-Joists are manufactured in a wide range of depths ranging from 9 ½&#;-24&#; and can be special ordered in lengths as long as 60 feet.
BCI Joists are available in standard depths up to 20&#; and AJS joists are available in depths up to 24&#;. The extra depths make an ideal solution for multifamily applications.
The answer to this question depends on many factors unique to your project. Download the BCI or AJS I-joist Specifier&#;s guide to see I-joist span chart for your specific application or learn more about the Boise Cascade software suite.
I have an addition that is to be built for a homeowner who wants I-joists. I&#;ve gotten MUCH conflicting info between my Lumberyard and the Big box stores as to the right size joist.
The big boxes are spec&#;ing Boise Cascade I-joists. The homeowner says they want to feel the floor as solid as possible with as little hint of deflection as possible.
The structure in question here is 20ft 6&#; long x 28ft wide. I plan to space I-joists 12 o.c across the width of 28ft for a total of 26 I-joists. I&#;m using 11 7/8&#; I josits. The span that they must span is of course 26ft 6&#; (this span includes the foundation wall, outside to outside).
The owner plans for carpet on the floor, maybe wood. A possible large typical aquarium, typical furniture and chairs (this is a Sunroom). The upstairs floor, which mirrrors the first, will be a master BR consisting of typical BR furnishings like a nice heavy bed set.
I&#;ve been told I can get away with a BCI 90 which is a 3.5&#; top/bot cord of the joist. I also been told I can do it with a BCI MINIMALLY, or that I can use a BCI . One places says I&#;m told by the others wrongly. One place says I MUST use a 3.5&#; cord. Other places say I must use web stiffeners.
Any opinions out there on who is right? One place claims the mfgr says I must use 3.5&#;. I don&#;t know who to believe. The price difference is almost double between BCI and BCI 90.
If at first you don&#;t succeed, try using a hammer next time&#;everything needs some extra persuasion from time to time. -ME
Want more information on door skin plywood? Feel free to contact us.