What Is Alkali Resistant Glass Fiber?

Contact us to discuss your requirements of alkali resistant fiberglass net supplier. Our experienced sales team can help you identify the options that best suit your needs.

The majority of artisan concrete projects, including concrete countertops, architectural panels, concrete vanities, and concrete furniture pieces often achieve their primary reinforcement using fiber technology. Understanding which fibers are functional as primary reinforcement, and the reasoning behind which fiber to use in a given situation, is helpful in achieving a well reinforced object.

Three of the reinforcing fibers that are the most widely used are Alkali Resistant Glass Fibers, PVA Fibers, and AC50 Acrylic Fibers. There are many other fibers that are available, including nylon and polypropylene, but these are typically used for shrinkage control and secondary reinforcement, not as a primary reinforcement. For now we will focus on the benefits and drawbacks of using Alkali Resistant Glass Fibers.

What Is Alkali Resistant Glass Fiber?

Alkali Resistant (AR) Glass Fiber is glass fiber with added zirconium oxide to help resist attack from alkalinity. This is an important element of these fibers, as concrete is a very alkaline environment. Normal fiberglass (e-glass) degrades in concrete due to the aggressive alkaline environment. AR fibers have been widely used in the concrete industry since the 's. Glass fiber allows for thinner and lighter weight concrete. Steel reinforcement is no longer necessary. AR Glass Fiber is the primary reinforcement used in GFRC (Glass Fiber Reinforced Concrete).

AR Fiber is produced in bundles, and held together with a resin called 'sizing'. A bundle will have varying numbers of filaments, depending on the intended application. The bundles work to allow a certain amount of ductility to the concrete, while also producing the necessary tensile strength for many applications. The tensile strength of the glass fiber is greater than that of steel, and the fiber is significantly less 'elastic' than concrete. This means that once the concrete is forced to failure, the glass is still holding the matrix together, providing strength and ductility. Since the glass does not stretch and elongate, the failure of the fiber is sudden and catastrophic, as opposed to the PVA fibers that will stretch prior to failure.

AR GLASS IS PRODUCED AS CHOPPED BUNDLED FIBERS, ROVING, AND SCRIM

• Chopped Bundled Fiber is cut into various lengths, and with varying numbers of filaments per bundle. More often than not, when failure occurs, the fibers are more likely to pull out of the concrete matrix rather than break. This means that longer fibers are less prone to failure than are shorter fibers. The number of filaments per bundle has an effect on both the strength and the workability of the concrete mix. When these 2 variables are considered, we believe that a 19mm (3/4") 200 filament fiber bundle is best suited for most artisan applications.
• Roving is a continuous strand of fiber. This roving is most frequently used with specific equipment that chops the fiber and incorporates the fiber into a concrete slurry during the casting process. Roving is also what is used to produce Scrim.
• Scrim is a woven fabric of roving. Since fibers are more likely to pull out, than they are to break, having a continuous thread of fiber through the tensile plane will provide greater tensile strength than will fibers alone.

When Should AR Glass Fiber Be Used?

Benefits-

• The primary benefit of AR Glass Fiber is the strength they provide relative to how they effect the workability of the concrete mix during application. Generally put, glass fibers produce good strength, and are easy to work with.
• Scrim provides a great way to provide localized strength in specific tensile planes. To understand where these tensile planes occur, read THIS ARTICLE.
• AR Glass fiber provides a great strength to cost ratio.

Drawbacks-

• The primary drawback of AR Glass fiber is visibility in the finished surface. Because the fibers are bundled, the fibers are easily visible in finished surface unless specific measures are taken.
• Also, AR Glass fiber will breakdown when overmixed.

Considerations-

• AR Glass fiber is typically used in concrete composites, meaning there is a "face" that doesn't contain fiber, and a structural mix containing the fiber. This is not the case in "SCC" mixes that are properly proportioned. The fibers will lift off the surface of the finished face during casting due to the specific gravity of the fiber in relation to the other constituents of the mix. In SCC applications, only a limited amount of polishing can occur during processing to avoid exposing the fibers.
• Multiple layers of scrim can be used, with layers of mix between the scrim, to add additional tensile strength.
• Care should be taken when placing scrim near finished faces in order to avoid "shadowing" of the fiber in the finished faces.
• Glass should be added later in the mixing process, and should not be overmixed. The fibers should be blended homogeneously into the mix, but continuing mixing beyond that will increase the potential of shredding the fiber.
• Combinations of glass and pva can be used to increase flexibility and impact resistance.

Dosage-

Dosages rates of glass fibers vary heavily depending on the application and desired outcome. Dosage can range from 1% to 6%. This depends heavily on the mix recipe, mixing process, and application method. In most artisan mixes, a dosage rate around 3% is most appropriate.

Note- All dosage rates are based on the weight of the total mix. (Dry Mix + Liquid) x Dosage Rate

Every situation is different. If you are not certain about whether an application is appropriate, you can share your concerns and receive feedback by filling out this form.

Craftsman Mix and CounterMix - Glass fiber is an ideal reinforcement for this mix. In most cases it will eliminate the need for steel reinforcement, adding benefits not gained with steel, and simplifying the process.

• Press Finish :: Used in the structural layer. Do not use in the initial press layer. dosage rate- 2-3%
• Troweled Finish :: Used in the structural layer. Do not use in the final troweled layer. dosage rate- 2-3%
• Cast Finish :: Glass can be used in 'cast' applications, but should be done with consideration. Often a thin layer without glass is cast into the mold, followed by a structural mix. Working up vertical walls can be tricky with this type of composite. dosage rate- 1-3%

GFRC Blended Mix - "GFRC", it is called that for a reason.

• Backer Mix :: Ideal fiber for this application- dosage rate- 2-3%
• SCC :: A good consistency of mix must be achieved to allow the fibers to slightly 'float' off the finished mold surface. dosage rate- 1-3%
• Sculpting Mixes :: Ideal for use in the structural body of a sculpture, but must be kept away from the finished surface. dosage rate- 1-3%

ECC Blended Mix - There are times that glass fiber is used in ECC mixes through the structural body of the mix. achieving the right mixing protocol and dosage rate to achieve this should be taken into careful consideration.

Get specific recipes for these mixes and fiber doses in our Catalog of Products and Techniques.

Choose from our selection of AR Glass Fiber

 

Want more information on alkali resistant fiberglass cloth supplier? Feel free to contact us.

The CTech-LLC® Alkali-resistant system&#;s mesh fabric (ARFM&#;) is made from E-glass woven fabric as its basis mesh, and then should be coated by alkali-resistant agent. With strong elastic modulus and fracture strength, ARFM&#; mesh is the ideal material that effectively reinforces cement concrete.

Key Features

• ARFM&#; in alkali-resistant system has ability to resist the alkalinity of the base coats.
• Good dimensional stability, stiffness, smooth and not easy to shrinkage and deform, excellent positioning.
• Water resistance.
• Resistance to aging and attack from breakdown.
• Cable of meeting a variety of requirements..
• Low weight.
• High mechanical strength.

Applications

CTech-LLC® ARFM&#; is used for several structural and non-structural interventions, among them we can include:

• As an integral part of the structure in exterioriInsulation finishing systems)
• Strengthen waterproof medium.
• Reinforcing concrete cement.

Storage Conditions

Store product in a dry area with no exposure to moisture.

Shelf Life

Shelf life is 10 years.

Options

Product Code

Unit

ARFM&#;110

ARFM&#;120

ARFM&#;120

ARFM&#;145

ARFM&#;160

ARFM&#;160

ARFM&#;200

Total Weight gsm 110 120 120 145 160 160 200 Mesh Size mm*mm 6*4 8*8 5*10 5*5 5*5 10*10 3*3 Tensile Strength in Standard Condition warp/weft N/50 mm / / / / / / / Elongation in Standard Condition warp/weft % 4 / 4 3.5 / 3.5 3.5 / 3.5 3.8 / 3.8 3.7 / 3.7 3.7 / 3.7 3.5 / 3.5

NOTE: other types of fiberglass meshes are available by customer&#;s order

Codes and Standards

ACI, , Guide to Design and Construction of Externally Bonded FabricReinforced Cementitious Matrix (FRCM) Systems for Repair and Strengthening Concrete and Masonry Structures, ACI 549.4R-13, American Concrete Institute, Farmington Hills, MI.

ACI, , Report on Ferrocement, ACI 549R-18, American Concrete Institute, Farmington Hills, MI.

ACI, , Design Guide for Ferrocement, ACI 549.1R-18, American Concrete Institute, Farmington Hills, MI.

Waranty

CTech-LLC® warrants its products to be free from manufacturing defects. Buyer determines suitability of product for use and assumes all risks. Buyer&#;s sole remedy shall be limited to replacement of product. Any claim for breach of this warranty must be brought within one month of the date of purchase. CTech-LLC® shall not be liable for any consequential or special damages of any kind, resulting from any claim or breach of warranty, breach of contract, negligence or any legal theory. The Buyer, by accepting the products described herein, agrees to be responsible for thoroughly testing any application to determine its suitability before utilizing.

For more information, please visit sourcing self adhesive drywall tape.