For more information, please visit 5.0mm PC Wire.
High Tensile Prestressed PC Steel Wire for Concrete
Intensity: 1470Mpa-1770Mpa.
Standard: ASTM, BS, DIN, GB.
Wire Diameter: 4.00mm-12.00mm.
Types of prestressed PC steel wire:
Prestressed PC steel wire application: Prestressed concrete strand is used of prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring project, multi-storey industrial buildings, stadiums, mines and etc. PE coated steel strand for prestressed concrete is suitable for large-span and large bays cast-in-place concrete floor, large load of precast beams and other special structure.
Many other steel wire and steel strand products:
Tensile Strength Requirements Nominal Diameter, mm(in) Tensile Strength, min, Mpa (psi) Type BA Type WA 4.88(0.192) 1725(250 000) 4.98(0.196) 1655(240 000) 1725(250 000) 6.35(0.250) 1655(240 000) 1655(240 000) 7.01(0.276) 1620(235 000) 1620(235 000) Yield Strength Requirements Nominal Diameter, mm(in) Internal StressMPa (psi) Minimum Stress at 1% Extension, Mpa (psi) Type BA Type WA 4.88(0.192) 200(29 000) 1465(212 500) 4.98(0.196) 200(29 000) 1407(204 000) 1465(212 500) 6.35(0.250) 200(29 000) 1407(204 000) 1407(204 000) 7.01(0.276) 200(29 000) 1377(199 750) 1377(199 750) BS5896-1980 Diameter and deviation mm Nominal size m Nominal Weight g/m Minimum breaking load KN Nominal tensile strength Mpa 4.0±0.04CONTACT FORM
Full Name
Email Address
Country Code + Phone Number
Message
PC steel wires are widely used in concrete construction industry for pre-stressed steel structures: large-span bridges ( stay cable system), overhead crane beam, cement poles, coal mines rock-soil anchoring project, multi-storey frameworks (slab and hollow floors), subway, railway sleepers, dams, shell safety of nuclear power stations, high-rise buildings (television tower, water towers, concrete silo, sewage treatment, hydropower project, stadiums) and etc.
Quality: ASTM A-416, BS 5896, JIS G3536, the standards and cutomized specifications.
Common wire materials for production: High tensile wires, plain or galvanized.
The process involves the continuous heating and stretching of a cold drawn high-carbon steel wire to produce a finished product with a much improved yield stress and greatly reduced load relaxation.
Contact us to discuss your requirements of astm a416 grade 270. Our experienced sales team can help you identify the options that best suit your needs.
Prestressing concrete steel wire can be divided according to wire diameter, the intensity level, the surface coating or cross-section:
1. According to diameter, PC steel wire can be categorized as: 4mm, 4.8mm, 5.0mm, 5.1mm, 6.0mm, 6.35mm, 7.0mm, 7.8mm, 8.0mm, 9.0mm, 10.0mm, 11mm, 12mm and so on.
2. According to tensile strength, pc wire can be classified as: 1470MPa, 1570MPa, 1670MPa, 1770MPa and 1860MPa.
3. According to the surface coating, pc wire can be classified as: uncoated prestressed steel wire, prestressed epoxy coated steel wire and galvanized prestressed steel wire.
4. According to forms of the surface, it can be classified as: Round plain wires, spiral ribbed (spiral ribbed or helix grooved) steel wires, crimped wires, slotted (indented) wires, and so on.
5. According to wire treatment process, pc wire can be categorized as follows: cold-drawn pc wire and low relaxation pc wire.
6. According to wires applied, pc wire can be classified as single individual pc wire and helically stranded wire ( pc strand).
7. According to applications, pc wire / strand can be divided into:
Un-bonded strand: zinc coated, grease filled; uv stabilized polymer sheath, for post tensioning
Bonded strand, retardant, galvanized bright, with PE shielding, for stable cable, suspension wire cable for bridge construction
8. According to structures, stranded wire can be classified into 2 wire strand, 3 wire strand or 7 wire strand mostly.
Post-tensioning is very useful to defeat the natural weakness of concrete in tension and to optimize its strength in compression. In concrete structures, using high-tensile steel wire / strand placed in the element prior to casting will:
1,
Reduces occurrence of cracks .
2,
Increase in durability.
3,
Less deformations (improved serviceability).
4, Increase in shear capacity.
Since concrete is weak in tension, the reinforcing steel bar / rebar is used inside concrete for strengthening and reinforcing the tensile strength of concrete. Reinforcing steel bars are used to absorbs the tensile, shear, and sometimes the compressive stresses in a concrete structure.
PC Wire, PC Strand Wire, PC Steel Wire For Vietnam,
PC Steel productions as below:
Comm : PC STEEL BAR/PC WIRE
Size: Φ7.1 , Φ9.0, Φ6 , Φ5
PC Wire 0.5" size for Bridge Project. in Lahore (Pakistan).
High Tensile Steel Wire (low Relaxation Prestressed Concrete Wire ) For Amman – Jordan
Bright plain high tensile steel wire of 7mm diameter as specified :
Uncoated 7 Wires PC Strands With Following Sizes ( ½ And 0.6 Inches ) For In Uae And Oman.
Grades : low relaxation according to ASTM- 416 , Grade 270 ( 1860 MPa).
7 Wire PC Strand, 15.24mm (ASTM A416 Gr 270 Low Relaxation) , 2.0ton – 3.5tons per coil
PC indentened Wire for Damascus
Straightened indented cold drawn pre-stressed steel wires of nominal diameter 7 mm.
according to the EN 10138/4/979 or BS 5896/80
- Nominal tensile strength: 1570 N/mm2
- Yield limit : 1420 N/mm2
- Guaranteed Yield point: at 0.2 % of permanent elongation 1380 N/mm2.
- Deflections : Max. 12 mm in 1 meter long.
- Diameter tolerance : 7 mm ± 0.05 mm
- Relaxation: Class 1 or Class 2
- Weight of Coil : manufacturer Choice , preferable less than 1000 Kg .
- Coil nominal inner diameter: 1800-2000 mm.
- Coil nominal outer diameter: about 2200 mm.
- Indentation depth: 0.15 mm± 0.05 mm , three indented faces with angle 45° , pitch 8 mm.
PC still wire for prestressed concrete railways sleepers, diameter 3 mm for Damascus
Specifications of the material (tensile strength; surface; coils weight, standard).
- Materiral : Prestressed concrete pc wire steel dia 7mm.
- Standard ACC BS 5896 – 1980 and EN 138/4/1979 OR equivalent
- Tensile strength :1570 N/mm2.
- proof strength :1420 N/ MM2.
- Diameter :7 mm.
- Relaxation :class1.
- deviation :max 12mm for L1m.
- the Surface:
indented pc wire steel.
indent depth 0.15 mm +- 0.5.
indented on three faces at a 45 degree angle.
- Coils weight: (500 , 700) kg.
- Interior diameter (1800-2000)mm
- Outer diameter of the coils approx. (2200 ) mm.
Standard:
all Production (pc wire), control and testing according to above standard.
- inspection :
will be by a neutral third party, through a competent inspection company selected by payer.
- Diameters :7 mm. - Tolerance of diameter 7mm +-0.5
- Quantity: 300 ton.
Delivery syria port( lattakia)
PC Plain Cold Drawn Wire 4 mm Diameter For Germany
PC wire strand 4mm
PC wire strand 5mm
Spiral Steel Wire-OD2.7mm for Malaysia
NTW Wire - Non Tensions Wire-OD6mm
Prestressed PC Wire- 4 side indented oval shave
Size: OD 5mm
OD 7mm
Supply Prestressing Steel Wire 140/160 Dia 9.4mm In Length 2337mm, Round Smooth, Cold Drawn Acc. To En10138-2
Material grade:smooth wire st1460/1620 min.
Size:dia.9.4mmx2337mm length
Galvanized Steel Strand
The vertical hot-dip galvanized technology ensures coating thickness.
Common structure: 7 strands / 19 strands
Application: for ACSR, stay wire, Guy wire, barrier cable, guardrail strand, overhead earth wire
Material: high carbon steel
Galvanized steel wire size: Φ1.44mm-4.770mm
Strand size:7×（1.44-4.2 mm）;19×（1.44-3.5mm）
Tensile strength: different Grade from min.1470 N/mm2 to min.1960N/mm2
Zinc coating: According to ASTM A475 Class A
Meets ASTM Specifications A475 or A363 or ASTM B498 or BS EN 50189
PC Steel Wire S Grooved, Supply to Iran
Name
pc steel wire Designation Diameter 4mm 4.8mm 5mm 6mm 7mm Grade ASTM A 421 Nominal cross section area (mm2) 18.7 Diameter Tolerance 0.00mm / ± 0.05mm Yield stress (N/mm2) 1400Min.
Tensile stress (N/mm2) 1670 Min. Elongation (%) 3.5 Min. Relaxation (%) 2.0 Max. Groove number 4 Groove direction SCold Drawn PC Wire in Coils
Material: Prime Alloy Steel Wire for in coils for prestressing of concrete
Technical Specifications:
- Designation as per British Standard BS 5896/2 Wire-1670-7-DE-relax 2
Explanation of designation (Basic specifications)
- Standard BS 5896-section 2
- Diameter of Wire: 7 mm.
- Surface condition: smooth (E)
- Tensile strength: 1670 MPa
- Relaxation : class 2 (1% @ 60% initial load, 2.5% @ 70% initial load and 4.5% @ 80% initial load)
- Coil outer diameter: 2.3 m. max.
- Yield stress (0.1 proof Stress): 1390 MPa
- Elongation: 3.5%
- Ductility: 4 Times 20 mm. Bending
Packing: Mill's Standard with Coil Weight of 1700-2400 Kg.
Indented PC Wire, Steel
- Materiral :
Prestressed concrete pc wire steel dia 7mm.
- Standard ACC BS 5896 – 1980 and EN 138/4/1979 OR equivalent
- Tensile strength :1570 N/mm2.
- proof strength :1420 N/ MM2.
- Diameter :7 mm.
- Relaxation :class1.
- deviation :max 12mm for L1m.
-the Surface:
indented pc wire steel.
indent depth 0.15 mm +- 0.5.
indented on three faces at a 45 degree angle.
- Coils weight: (500 , 700) kg.
- Interior diameter (1800-2000)mm
- Outer diameter of the coils approx. (2200 ) mm .
- Diameters :7 mm. - Tolerance of diameter 7mm +-0.5
Delivery to Syria
PC Bars
Steel Bars for manufacturing of PC Poles and Spun Piles.
Want more information on High carbon low relaxation prestressing steel wire? Feel free to contact us.