When should I replace my flexible hose?

28 Oct.,2024

 

How long do flexible hoses last?

How long should braided steel flexible rubber hose pipes last?

I have a water softener that was already in the house when I moved in about 12 years ago. I don't know how long it had been in before then, but the house is 18 years old, so it can't be older than that. It sits under the kitchen sink and connects close to the mains water inlet to the house. The feed and outlet are connected by these flexible hose pipes which are about 25mm external and 12mm internal diameter, and they are hardly ever disturbed. The only point of them being flexible is to allow the softener to be slid out for servicing, which it hasn't needed since I moved in.

After noticing a drop in water pressure I found some black gritty particles blocking the water softener inlet filter. Clearing the blockage initially restored the water pressure but it dropped again after a couple of people showered and flushed loos etc. I looked at the softener inlet filter and it was partially blocked with more black particles again. For the moment, I've just cleaned the filter again and the pressure is currently OK.

However my concern is that the particles blocking the filter are coming from the rubber in the flexible pipes breaking apart and they would need replaced before they fail completely. Surprisingly, the rubber washers in the connectors look almost new, with no sign of corrosion at all.

So, does anyone know how long these flexible pipes can be expected to last in fairly static, dark conditions?

If you want to learn more, please visit our website.

Is It Time to Replace Your Flexible Hose?

Is It Time to Replace Your Flexible Hose?

Posted: September 29, | Category:

Posted: September 29, |Category: Flexible Hoses

When transferring hot, corrosive, or otherwise hazardous liquids, the equipment you use can make a significant difference in terms of safety and efficiency. While it is crucial to choose high-quality flexible hoses for your operation, it is equally important to recognize signs of wear and determine if it is time to replace your flexible hose. Failure to replace a faulty hose can drastically increase the risk of accidents, damaged equipment, and employee injury. To help you recognize the signs and make a timely replacement, the experts at Flextech Industries have put together a list of common signs to watch for and help you determine if you need a new hose before it is too late.

Learn about the different types of flexible hoses and their unique qualities.

3 Signs that you Need a New Flexible Hose

Even if you choose high-quality products and maintain a stringent maintenance schedule, your flexible hoses, fittings, and other components will need to be replaced at some point. If you notice any of the following signs, it may be time to replace your flexible hose:

1. Leaks and Reduced Performance

If you notice small puddles under hoses or on the surface of hoses, this is often a sign of a leak somewhere in the hose or fitting. Reduced pressure or flow can also be a sign of a leak somewhere in the system, especially if the system is normally consistent. Small leaks can quickly expand, leading to larger spills and severely reduced flow/performance. In addition to the hose and fittings, be sure to check all seals to ensure that they are in optimal condition. If your seals are in good condition and fitted properly, your hose is likely damaged and will need to be replaced.

Xinshun supply professional and honest service.

Learn how to maximize the life of your hose assembly.

2. Loose Connections and Slippage

A full and secure seal at both connection points is crucial for minimizing the risk of spills, leaks, and equipment damage. If this connection starts to loosen and can no longer be tightened, this is a sure sign that it is time for a replacement. Slippage can cause hoses to come loose and fall off, leading to potential safety risks for surrounding personnel. If you handle hazardous fluids for your operation, be sure to replace slipping hoses as soon as possible.

Why is it important to choose the right flexible hose?

3. Cracks, Cuts, and Corrosion

For applications that deal with fluids under extremely high pressure, cracks and cuts in hoses can present a severe safety risk. These cracks or cuts can burst, leading to severe spills and potential damage to surrounding equipment. In addition to cracks, metal hoses and specialty transfer hoses can be at risk for corrosion in certain environments. If you notice cracking or corrosion near fittings or on the hose casing, it is time for a replacement.

To learn more about our selection of flexible hoses or to inquire about our other products, get in touch with the team at Flextech Industries. We can be reached through our online contact form and will be happy to answer any questions you may have regarding our products.

Are you interested in learning more about Flexible Rubber Hose? Contact us today to secure an expert consultation!