They all give you these advantages:
Capped nuts &#; another common name for them &#; are commonly found in automotive applications. The use tends to be as a decorative cap nut to give applications a finished look. The construction industry typically uses them for the protection they provide. Machinery also uses cap nuts. Depending on the position of the bolt, you can use any type of cap nut as space allows. The end story is, wherever bolts, nuts and rods are exposed, cap nuts are used to protect threaded fasteners, from construction and machinery to cabinets.
Usually, cap nuts are dome nuts, or more specifically, domed hex nuts. They&#;re sometimes called acorn nuts, which are in fact a type of nut cap. Perhaps the easiest way to describe a cap nut is that it&#;s a standard hex nut that, instead of being through tapped, is closed end.
Acorn cups have a pointed dome with a high crown, as shown here. They serve a slightly different purpose than a dome cap. Acorn cap nuts have more internal depth, which enables you to thread the bolt further into the nut without touching the cap.
With cap nuts, the bolt&#;s external threads touch the cap. If the application involves vibration, this can lead to excessive wear. The acorn nut is used to avoid contact with the bolt, preserving the threads.
Not all cap nuts are domed nuts, as shown here. While they all provide protection, they&#;re also decorative cap nuts.
Bolt head & nut caps
Hexagonal nut caps
Snap-on nut caps
Nut protection caps
Metal dome nuts
A push-fit cap nut is positioned over the stud and pressed down either by hand or with a light tap of a rubber mallet. If the cap nut is threaded, they simply screw onto the bolt and tighten with a wrench or allen key.
Nut caps are easily removed. A push with your fingers or a light tap with a rubber mallet will release the nut cap. How to remove a cap nut if it&#;s metal is also simple. Apply lubricant and loosen with a wrench or allen key.
Plastics and metals are both popular choices for cap nuts. For decorative purposes, stainless steel is extremely popular, which is why it&#;s the material of choice for automotive applications, such as emblems. Stainless steel also resists corrosion, with some grades doing a better job than others.
You can learn more in our guide, Understanding stainless-steel guides.
Mild steel is another metal often used to make cap nuts. It&#;s a low-carbon steel, meaning it&#;s more vulnerable to corrosion unless it&#;s been properly coated.
Brass dome nuts are used mostly for aesthetic purposes. If you want thermal or electrical conductivity, it&#;s a good choice. It also resists corrosion.
Plastic dome nuts are corrosion resistant, too, while some are formulated to stand up to UV. An LDPE or nylon dome nut is also excellent if you&#;re looking for more insulation for your application, or resistance to vibration. So what then, is the difference between nylon and LDPE?
Properties Nylon 6/6 LDPE Tensile strength &#; pull apart (psi) 12,400 1,400 Dielectric strength &#; insulation (v/mil) 300 &#; 400 460-700 Bending stiffness (psi) 410,000 30,000 Resistance to chemicals Dilute acids 1 3 Dilute alkalis 2 1 Oils & greases 5 2 (variable) Aromatic hydrocarbons 5 1 Halogenated hydrocarbons 3 (variable) 1 Alcohols 1 51=Poor/ 2=Fair / 3=Good / 4=Very good/ 5=Excellent
Keep in mind that cap nuts are just like regular nuts but with a dome, or cover, on one side. They are therefore measured the same way. Sizes refer to the nominal thread diameters.
When sizing, you need to understand how to measure the threads of the bolts and nuts you&#;ll need. We walk you through this in our guide, What are the different types of nuts and bolts?
With cap nuts, you&#;ll also have to pay attention to the overall height to ensure your bolt will fit inside.
You&#;ll also want to measure the flat of the dome nut. This is your diameter. Turn the cap nut over and measure from one end to the side opposite of where the tape is. Metric sizes are becoming more common in the U.S., so we&#;ll show you examples of sizes for both systems.
Metric nuts:
Metric cap nuts, like imperial, come in a variety of sizes. You can get an M4 dome nut, M6 dome nut, M10 dome nut, and so on. Example sizes include:
Millimeters
Size Across the flats Overall height M3 6.0 5.93 M4 7.0 7.96 M5 8.0 9.90 M6 10.0 11.82 M8 13.0 14.96 M10 17.0 18.03 M12 19.0 21.93
Imperial nuts:
The benefit of using metric fasteners is that that it gives you a global market for your application, while making it easier to work with partners in other regions around the world. Only the U.S. uses the imperial system. If that&#;s the system that best suits you, here are some example sizes for dome nuts:
Inches
Size Across the flats Overall height 6-32 5/16 1/4 8-32 5/16 1/4 10-24 3/8 9/32 10-32 3/8 11/32 ¼-20 7/16 21/64 5/16-18 9/16 3/8 3/8-16 5/8 27/64 ½-13 3/4 9/16 5/8-11 15/16 51/64Free CADs are available for most solutions, which you can download. You can also request free samples to make sure you&#;ve chosen exactly what you need. If you&#;re not quite sure which solution will work best for your application, our experts are always happy to advise you.
Whatever your requirements, you can depend on fast despatch. Request your free samples or download free CADs now.
Questions?
us at or speak to one of our experts for further information on the ideal solution for your application 800-847-.
This article is about the type of hardware fastener. For the tree nut, see Acorn
An acorn nutAn acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance.
Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon. They can also be chrome plated and given a mirror finish.[1]
There are two types of acorn nuts. One is low, or the standard acorn nut. The other is the high acorn nut. The high acorn nut is wider and higher and will protect extra long studs. There are also self-locking acorn nuts that have distorted threads in the hex area to create a tight friction fit to prevent the nut from vibrating loose.
There are standards governing the manufacture of acorn nuts. One is Society of Automotive Engineers (SAE) Standard J483, High and Low Crown (Blind, Acorn) Hex Nuts. Another is Deutsches Institut für Normung (DIN) , Hexagon Domed Cap Nuts.
References
[
edit
]
They all give you these advantages:
Capped nuts &#; another common name for them &#; are commonly found in automotive applications. The use tends to be as a decorative cap nut to give applications a finished look. The construction industry typically uses them for the protection they provide. Machinery also uses cap nuts. Depending on the position of the bolt, you can use any type of cap nut as space allows. The end story is, wherever bolts, nuts and rods are exposed, cap nuts are used to protect threaded fasteners, from construction and machinery to cabinets.
Usually, cap nuts are dome nuts, or more specifically, domed hex nuts. They&#;re sometimes called acorn nuts, which are in fact a type of nut cap. Perhaps the easiest way to describe a cap nut is that it&#;s a standard hex nut that, instead of being through tapped, is closed end.
Acorn cups have a pointed dome with a high crown, as shown here. They serve a slightly different purpose than a dome cap. Acorn cap nuts have more internal depth, which enables you to thread the bolt further into the nut without touching the cap.
With cap nuts, the bolt&#;s external threads touch the cap. If the application involves vibration, this can lead to excessive wear. The acorn nut is used to avoid contact with the bolt, preserving the threads.
Not all cap nuts are domed nuts, as shown here. While they all provide protection, they&#;re also decorative cap nuts.
Bolt head & nut caps
Hexagonal nut caps
Snap-on nut caps
Nut protection caps
Metal dome nuts
A push-fit cap nut is positioned over the stud and pressed down either by hand or with a light tap of a rubber mallet. If the cap nut is threaded, they simply screw onto the bolt and tighten with a wrench or allen key.
Nut caps are easily removed. A push with your fingers or a light tap with a rubber mallet will release the nut cap. How to remove a cap nut if it&#;s metal is also simple. Apply lubricant and loosen with a wrench or allen key.
Plastics and metals are both popular choices for cap nuts. For decorative purposes, stainless steel is extremely popular, which is why it&#;s the material of choice for automotive applications, such as emblems. Stainless steel also resists corrosion, with some grades doing a better job than others.
You can learn more in our guide, Understanding stainless-steel guides.
Mild steel is another metal often used to make cap nuts. It&#;s a low-carbon steel, meaning it&#;s more vulnerable to corrosion unless it&#;s been properly coated.
Brass dome nuts are used mostly for aesthetic purposes. If you want thermal or electrical conductivity, it&#;s a good choice. It also resists corrosion.
Plastic dome nuts are corrosion resistant, too, while some are formulated to stand up to UV. An LDPE or nylon dome nut is also excellent if you&#;re looking for more insulation for your application, or resistance to vibration. So what then, is the difference between nylon and LDPE?
Properties Nylon 6/6 LDPE Tensile strength &#; pull apart (psi) 12,400 1,400 Dielectric strength &#; insulation (v/mil) 300 &#; 400 460-700 Bending stiffness (psi) 410,000 30,000 Resistance to chemicals Dilute acids 1 3 Dilute alkalis 2 1 Oils & greases 5 2 (variable) Aromatic hydrocarbons 5 1 Halogenated hydrocarbons 3 (variable) 1 Alcohols 1 51=Poor/ 2=Fair / 3=Good / 4=Very good/ 5=Excellent
Keep in mind that cap nuts are just like regular nuts but with a dome, or cover, on one side. They are therefore measured the same way. Sizes refer to the nominal thread diameters.
When sizing, you need to understand how to measure the threads of the bolts and nuts you&#;ll need. We walk you through this in our guide, What are the different types of nuts and bolts?
With cap nuts, you&#;ll also have to pay attention to the overall height to ensure your bolt will fit inside.
You&#;ll also want to measure the flat of the dome nut. This is your diameter. Turn the cap nut over and measure from one end to the side opposite of where the tape is. Metric sizes are becoming more common in the U.S., so we&#;ll show you examples of sizes for both systems.
If you are looking for more details, kindly visit hdg domed nut.
Metric nuts:
Metric cap nuts, like imperial, come in a variety of sizes. You can get an M4 dome nut, M6 dome nut, M10 dome nut, and so on. Example sizes include:
Millimeters
Size Across the flats Overall height M3 6.0 5.93 M4 7.0 7.96 M5 8.0 9.90 M6 10.0 11.82 M8 13.0 14.96 M10 17.0 18.03 M12 19.0 21.93
Imperial nuts:
The benefit of using metric fasteners is that that it gives you a global market for your application, while making it easier to work with partners in other regions around the world. Only the U.S. uses the imperial system. If that&#;s the system that best suits you, here are some example sizes for dome nuts:
Inches
Size Across the flats Overall height 6-32 5/16 1/4 8-32 5/16 1/4 10-24 3/8 9/32 10-32 3/8 11/32 ¼-20 7/16 21/64 5/16-18 9/16 3/8 3/8-16 5/8 27/64 ½-13 3/4 9/16 5/8-11 15/16 51/64Free CADs are available for most solutions, which you can download. You can also request free samples to make sure you&#;ve chosen exactly what you need. If you&#;re not quite sure which solution will work best for your application, our experts are always happy to advise you.
Whatever your requirements, you can depend on fast despatch. Request your free samples or download free CADs now.
Questions?
us at or speak to one of our experts for further information on the ideal solution for your application 800-847-.
This article is about the type of hardware fastener. For the tree nut, see Acorn
An acorn nutAn acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance.
Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon. They can also be chrome plated and given a mirror finish.[1]
There are two types of acorn nuts. One is low, or the standard acorn nut. The other is the high acorn nut. The high acorn nut is wider and higher and will protect extra long studs. There are also self-locking acorn nuts that have distorted threads in the hex area to create a tight friction fit to prevent the nut from vibrating loose.
There are standards governing the manufacture of acorn nuts. One is Society of Automotive Engineers (SAE) Standard J483, High and Low Crown (Blind, Acorn) Hex Nuts. Another is Deutsches Institut für Normung (DIN) , Hexagon Domed Cap Nuts.
References
[
edit
]
If you want to learn more, please visit our website is rebar hot or cold rolled.