The Cold Storage Insulated Roof Panels are optimized for cold and freezing rooms built outside of warehouses or storage buildings were the need of refrigerated or temperature-controlled room are need it. These spaces are usually found outside and thermal leaks should be minimized in the inside because you will be storing products that need very specific climatic conditions, even reaching negative degrees. To achieve this goal, the roof refrigeration panels have a thicker than normal polyurethane foam core, reaching 100 mm for high-performance cooling room that reach sub-zero temperatures.
If you are looking for more details, kindly visit our website.
This Frigorific Sandwich Panel for roof has the highest thermal insulation on the United States. It has a special geometry of 3 frets that increases the resistance of the panel. The Sandwich Panel for cold rooms specifically optimized the preservation of food products (fruits, meat, fish, etc.) that need to be stored at very specific temperatures. In addition, we have also installed it in laboratories and hospitals.
The cold room ceiling panels have the same installation system as the rest of standard roof panels, however, they incorporate a special airtight joint to protect the union between panels even more and avoid thermal leaks, which is so dangerous for these freeze rooms and cold rooms. In this way, the passage of heat or cold is minimized, in addition, its ridged surface also provides resistance to the whole of the freezing chamber and allows to withstand light filtering.
The Cold Storage Insulated Roof Panels it has a very low price, considering that it can be installed without the need for accessories or heavy machinery. Together with its excellent technical characteristics make the refrigeration panel for roofs the best option for conservation and maintenance of all types of products
*The values shown are approximate. For more information, please contact our sales representatives.
The technical data of the panel are average values obtained in different tests on the Cold Storage Insulated Roof Panels. Depending on the type of thickness of the panel and steel, there may be some change. However, these values have been verified and they exceed the usual quality standards in the U.S. market.
*The values shown are approximate. For more information, please contact our sales representatives.
The technical data of the panel are average values obtained in different tests on the Cold Storage Insulated Roof Panels. Depending on the type of thickness of the panel and steel, there may be some change. However, these values have been verified and they exceed the usual quality standards in the United States.
*The values shown are approximate. For more information, please contact our sales representatives.
The technical data of the panel are average values obtained in different tests on the Cold Storage Insulated Roof Panels. Depending on the type of thickness of the panel and steel, there may be some change. However, these values have been verified and they exceed the usual quality standards in the U.S market.
The Cold Storage Insulated Roof Panels its built as follow: two metal plates with an outline steel that is galvanized and pre-lacquered, with an internal rigid layer core, which serves for insulation made out of polyurethane foam that expend at a 40 kg / m3. But what really differentiates the Sandwich Panel for cold rooms from the rest panels is that we can manufacture it in thicknesses much higher than usual. In Panel Sandwich Group, we are not concerned about the size of your development or the number of square meters, since we can adapt to your needs. Our concerned is to provide you with a high-quality product for a low price, and the Cold Storage Insulated Roof Panels for roofing, is just that, a panel that can be used on any construction site that requires high quality product, for a low price.
For the Cold Storage Insulated Roof Panels, we have different insulation thickness, these are between 50 and 100 mm, that could adapt to the level required for the development of your project. The U.S. standard color is Pyrenean White, however, under order and production we can develop more colors.
Installing the Frigorific Sandwich Panel for roofing in your project has its advantage, besides its low cost, you can obtain total protection and comfort against extreme temperatures. The Cold Storage Insulated Roof Panel has 3 frets, that when assembled one sheet of a panel overlaps the sheet of the other panel, and these are bolted together, and having the screw penetrate directly to the existing structure. Creating an airtight joint between panels, making it ideal to install on very conflictive and intense areas such as cold storage or freezing room, for its capacity to maintain an ideal temperature within the desire infrastructure.
It is recommended for a complete assembly of the frigorific panel, accessory such as the health profile end. This metal and PVC piece is placed in the joint and corners inside the cooling room to protect any temperature leakage. Furthermore, this accessory that is place on the interior surface of the freeze room, improve the cleaning and hygiene, of the same. For places such as food storage, slaughterhouses, cutting rooms, workshops or laboratories you can request another special plastisol finish that further increases the hygiene of the room.
We recommend the usage for the Cold Storage Insulated Roof Panels to be placed in all those cases in which the cold room, fridge storage room or warehouses is outside or in contact with external surface. The frets that form this panel will give you the ideal resistance so that your project has a long useful life with minimal maintenance.
Wiskind New Materials contains other products and information you need, so please check it out.
The fire resistance of the Cold Storage Insulated Roof Panels, has a classification of C S3 D0 / B S2 D0, and has a rigid insulating core that constitutes of polyurethane foam. These values are the result of the tests carried out in accordance with current regulations.